Call Anytime
MSME NO:UDYAM-MH-33-0363849
ISO 9001 : 2015 & 14001 : 2015 Certified Company
MSME NO:UDYAM-MH-33-0363849
ISO 9001 : 2015 & 14001 : 2015 Certified Company
Industrial valves are devices that are used to regulate liquids, gases, and slurries. The flow of liquids or gases can be controlled using these valves. This can be done through pipes and other passageways by opening, closing, and partially obstructing the passageway or pipe.
Industrial valves play a critical role in controlling, regulating, and directing fluid flow to maintain process efficiency, safety, and environmental protection. The usage of these valves includes: Controlling fluid flow: Valves are used to start, stop, regulate, or divert fluid flow.
A gate valve is generally used to completely shut off fluid flow or, in the fully open position, provide full flow in a pipeline. Thus it is used either in the fully closed or fully open positions. A gate valve consists of a valve body, seat and disc, a spindle, gland, and a wheel for operating the valve.
End Connection | Flanged |
Media | Water |
Size | 50 mm to 600 mm |
Pressure Rating | Class 150, 300, 600, 900, 1500 |
Body Material | Cast Iron |
Trim Materials | 13% Cr. Stellited, AISI 304/316/Monel |
Finish | Coated |
Globe valves are used primarily in situations where throttling of the commodity is required. By simply rotating the handwheel, the rate at which the commodity flows through the valve can be adjusted to any desired level.
Size | 15 mm To 600 mm |
Corrosion Proof | Yes |
Material | SS 304,SS 316 |
Usage/Application | Industrial |
Check valves are generally installed in pipelines to prevent backflow. A check valve is basically a one-way valve, in which the flow can run freely one way, but if the flow turns, the valve will close to protect the piping, other valves, pumps etc.
Color | Blue |
Usage/Application | Industrial / Domestic |
Packaging Type | cardboard box |
Surface Finishing | polished |
Ball valves are commonly used as fluid shutoff valves in onshore and offshore oil and gas production facilities. They are also used in fuel gas system feeding furnaces. Ball valves are designed to control the flow of high-pressure gasses and liquids with minimal pressure drop.
Pressure | High Pressure |
Material | Stainless Steel |
Valve Size | 1 1/2 Inch |
Connection | Threaded |
Size | 1/4" TO 4" |
Grade | 304 |
Connector Type | Threaded |
Butterfly valves are a family of quarter-turn rotational motion valves that are used in pipelines to shut-off flow. It is often said that butterfly valves can be used to regulate the flow. However, we do not recommend doing this, as it can damage the valve disk and have a negative effect on the sealing properties.
Valve Port Size | 4.0 Inch |
Valve Size | Up to 4 Inch |
Material | Stainless Stee |
Usage/Application | Liquid, water, bio pharma, chocolate. Milk |
Pressure | Medium Pressure |
Power | Manual |
A knife gate valve can be found in various processing sectors. Larger sizes are offered for thicker flows of heavy oils, slurry, light grease, varnish, pulp, and wastewater. Knife gate valves, on the other hand, have low-pressure limitations.
Usage/Application | Industrial |
Temperature | -29 to 300 Degree C |
Port Size | 2"-24" |
Media | Water |